Noble Company has introduced two new products for water-tight showers: Wall Seal Sheet Membrane for waterproofing shower walls and the ProBase system for shower floors.
Wall Seal is a PVC-based sheet membrane alternative to liquid-applied membranes. This new sheet ensures reliable, uniform thickness and quality and minimizes workmanship variables created when using liquids. Wall Seal is, in many cases, a cost-effective alternative to liquids and other wall membranes on the market.
Wall Seal is an effective barrier to water and vapor. It is easy to install. There is no curing needed and taping of backer board is not required. Use Wall Seal in residential or commercial applications in new construction or renovations.
ProBase is a waterproof, sloped shower base that is ready to be tiled. There is no need for a mortar bed over the base. ProBase is a composite made from high-strength polypropylene honeycomb with a Noble Sheet Membrane laminated to the top. ProBase is packaged with everything needed to ensure a watertight installation. It can be used with standard clamping ring drains, and it allows for up to 2 of adjustment in drain position. ProBase is easy to install; just thin-set it to the subfloor.
ProBase is available in two sizes: 48 x 48 and 32 x 60 (tub replacement). Both are easily cut to size on the job site. Custom sizes available for quantities of 50 or more. For information, call 800-878-5788. To see an instructional video of the ProBaseTM System, visit http://www.noblecompany.com/TechnicalData/Videos/tabid/70/Default.aspx
Wall Seal is an effective, easy to install barrier to water and vapor. There is no curing needed and taping of backer board is not required. ProBase is packaged with everything needed to ensure a watertight installation. It can be used with standard clamping ring drains, and it allows for up to two inches of adjustment in the drain position. ProBase is easy to install; just thin-set it to the subfloor.
")